Meeting the current market trends and customer requirements with our new, highly productive, digital printing press for small and large printruns in the commercial sector. The powerful Versafire LP stands for the best quality, large print volumes and a wide variety of materials.
As a digital all-rounder, Versafire LP with automatic color measurement and inline register ensures more safety and efficiency in your production.
Output switching between offset and digital printing, including color adjustments, can be done in seconds, even at the last minute. You can respond to customer needs at any time.
printed on one side or 1,030 mm (40.55 in) printed on both sides. Suitable for the production of six to eight-pagers as well as large posters on one sheet.
using automatic inline PDF-based color matching and correction as well as defect detection provides security and reduces manual effort.
with media-specific ICC profile creation ensures easy color adjustment to offset.
allows toner replacement in non-stop operation for consistently high productivity.
Interposer introduces pre-produced sheets into the pile during ongoing print production – for seamless inline postpress.
3 additional vacuum-assisted Large Capacity Trays can be loaded for increasing print volumes.
Intelligent automation makes working easy and intuitive. That’s why we developed the Prinect Digital Frontend for the Versafire – as a smart control center for short production times, quick job changes and personalization.
The Prinect Digital Frontend supports the standardized Production without compromise. Whether order creation, preflight check, color management or imposition, all steps can be automated.
Inside the Versafire LP, an active perfecting register scanner in conjunction with continuous calibration and integrated sheet cooling ensure reproducible quality. Optionally, each individual sheet can be compared with the corrugated PDF data and automatically rejected if there are any deviations. The result: always a perfect pile.
Integrated postpress opens up new possibilities, including on-demand production in printrun one. A sorted output of jobs saves time in finishing and reduces delivery times. With Versafire LP, you expand your offering. If requested, brochures trimmed on three sides with a straight spine, posters up to 1,260 millimeters long, and six- or eight-page banners including duplex creasing can be produced.
Sufficient space for the printing material, suitable for, e. g., 2,500 sheets each at 80 g/m² grammage.
They can be refilled independently during production and increase the production capacity during autonomous production.
Automatic quality control in the ACD (Auto Color Diagnosis) unit. Color deviations are automatically detected and corrected through realtime measurement of each individual sheet after printing in the Image Quality Monitor. Defects such as artifacts on the sheet can be detected by comparison with the PDF data and the sheets can be rejected if necessary.
Intuitive operation on the 21.5 ̋ touchscreen monitor with browserbased user interface and media recognition unit.
High added value, because printing and postpress take place in one go. Continuous production with new postpress options increases the diversity of the offering and shortens production and delivery times.
With two toner cartridges per color in the twin toner bay, non-stop production can be carried out in CMYK. This enables cartridges to be changed during operation, an essential requirement for autonomous production.
Reliable processing of grammages from 40 to 470 g/m² thanks to the large transport radius.
Additional material trays provide space for large formats such as banners up to 960 mm long.
The paper alignment is essential for accurate, high-quality perfecting. The Swing and Shift technology ensures this register accuracy right up to the banner format. In the feeding tray, sensors and air support prevent the infeed of double sheets. Vacuum suctiontapes ensure safe processing of a wide variety of printing materials.
The fuser fixes the applied toner onto the sheet at up to 200 °C, depending on the material thickness. Depending on the motif, the gloss level can be adjusted individually.
| Engine |
|
| Controller | Prinect Digital Frontend & Fiery |
| Media format min. width × length |
|
| Media format max. width × length |
|
| Printing speed |
|
| Print material* |
|
| Grammage | 40–470 gsm (duplex) |
| Max. monthly print volume | Up to 1,300,000 A3 sheets/month (simplex) |
| *Not all media approved |
| Weight |
|
| Dimensions (W × D × H) |
|
| Power consumption |
|
| Options |
|
Prinect Touch Free is an option of the Production Manager that seamlessly integrates offset and digital printing into a single workflow. With the help of AI, production decisions will be made fully automatically and precisely in the future. This central control system optimizes your production process, from PDF to finished product. Optimization takes into account the entire order book in three stages, and constantly adapts to changes to ensure the most efficient production method at all times.
