10/25/2022
Heidelberger Druckmaschinen AG (HEIDELBERG) is stepping up its sustainability management activities and will offset the carbon footprint of certain AMPERFIED charging stations by purchasing CO₂ certificates. HEIDELBERG has committed to climate neutrality at its sites by 2030, primarily by reducing CO₂ emissions. "We also take HEIDELBERG's climate promise very seriously with AMPERFIED products," says Robin Karpp, Commercial Managing Director of Amperfied GmbH. “With the HEIDELBERG AMPERFIED brand, we have dedicated ourselves to becoming the technology leader for an emission-free and liveable future. In addition to increasing energy efficiency and using renewable energies, CO₂ compensation is another step on this path.”
An additional offer enables drivers of electric cars in Germany to earn 400 EUR by selling the greenhouse gas reduction quota (GHG quota). For this, Amperfied GmbH cooperates with ZusammenStromen GmbH and their offering "Geld für eAuto" (money for e-car).
For the new "climate" variants of the successful Heidelberg Wallbox Home Eco and Heidelberg Wallbox Energy Control wall charging stations, HEIDELBERG offsets CO₂ emissions by supporting the CO₂OL Tropical Mix climate protection project. The project is certified according to the renowned Gold Standard and aims to reforest a total of 13,242 ha in Panama. The offsetting takes place through so-called emission reduction credits (certificates), with which the same amount of emissions is offset by the above-mentioned climate protection project. The CO₂ footprint of a wallbox is determined from the extraction of raw materials to the finished wallbox. HEIDELBERG determines the CO₂ footprint for printing presses using the same principle which has been certified by the Fraunhofer Institut UMSICHT.
Since a large part of the production takes place in Germany, Amperfied GmbH has direct insight into the processes and can influence that the production is as resource efficient as possible. While individual components such as chips are sometimes sourced from abroad, the complete assembly of circuit boards, switchgear and ultimately the wallbox takes place at the Wiesloch-Walldorf site.
Furthermore, when selecting materials, attention is paid to their recyclability. In addition, manufacturing in Germany leads to short transport routes to end customers and thus reduced transport emissions.
The wallboxes Home Eco climate and Energy Control climate differ from the standard models by an additional graphic on the front panel. Both charging stations are available immediately with a 5-metre charging cable through Amperfied GmbH's sales partners. The RRP for the Home Eco climate wallbox is EUR 549 incl. VAT, for the Energy Control wallbox EUR 810.
By selling their GHG quota via www.amperfied.de/de/clever-laden/thg-quote/, owners of purely battery-powered vehicles in Germany can now earn 400 EUR. To this end, Amperfied GmbH is cooperating with ZusammenStromen GmbH and its "Geld für eAuto" (money for e-cars) offering. Because driving an electric car actively helps to reduce climate-damaging greenhouse gas emissions, owners of purely battery-powered vehicles (cars, motorbikes and scooters with road registration) have been able to certify the CO₂ savings of their electric vehicle since the beginning of 2022 and sell them to companies subject to quotas. The abbreviation GHG quota stands for "greenhouse gas reduction quota". It is intended to reduce the emission of greenhouse gases by making it more expensive to emit them.
Figure 1: Amperfied GmbH offsets the CO₂ footprint of the Wallbox Energy Control climate by supporting selected climate protection projects. Visually, it differs from the standard Wallbox Energy Control model by an additional graphic on the front panel.
Figure 2: CO₂ footprint of the Wallbox Home Eco climate is also compensated by Amperfied GmbH according to the “cradle-to-gate” principle, which considers the CO₂ emissions generated during production as well as the energy and transport expenses caused by suppliers.
Figure 3: Since a large part of the production takes place in Germany, Amperfied GmbH has direct insight into the processes and can influence that the production is as resource efficient as possible.
Additional details about Heidelberg wallboxes:
Internet: www.amperfied.com
E-Mail: info@amperfied.com
Wallbox Hotline: +49 6222-82-2266
For additional details about the company and image material, please visit the Press Lounge of Heidelberger Druckmaschinen AG at www.heidelberg.com and in the Media Library.
Heidelberg IR now on Twitter:
Link to the IR Twitter channel: https://twitter.com/Heidelberg_IR
On Twitter under the name: @Heidelberg_IR
This press release contains forward-looking statements based on assumptions and estimations by the Management Board of Heidelberger Druckmaschinen Aktiengesellschaft. Even though the Management Board is of the opinion that those assumptions and estimations are realistic, the actual future development and results may deviate substantially from these forward-looking statements due to various factors, such as changes in the macroeconomic situation, in the exchange rates, in the interest rates, and in the print media industry. Heidelberger Druckmaschinen Aktiengesellschaft gives no warranty and does not assume liability for any damages in case the future development and the projected results do not correspond with the forward-looking statements contained in this press release.
10/25/2022
Heidelberger Druckmaschinen AG (HEIDELBERG) is stepping up its sustainability management activities and will offset the carbon footprint of certain AMPERFIED charging stations by purchasing CO₂ certificates. HEIDELBERG has committed to climate neutrality at its sites by 2030, primarily by reducing CO₂ emissions. "We also take HEIDELBERG's climate promise very seriously with AMPERFIED products," says Robin Karpp, Commercial Managing Director of Amperfied GmbH. “With the HEIDELBERG AMPERFIED brand, we have dedicated ourselves to becoming the technology leader for an emission-free and liveable future. In addition to increasing energy efficiency and using renewable energies, CO₂ compensation is another step on this path.”
An additional offer enables drivers of electric cars in Germany to earn 400 EUR by selling the greenhouse gas reduction quota (GHG quota). For this, Amperfied GmbH cooperates with ZusammenStromen GmbH and their offering "Geld für eAuto" (money for e-car).
For the new "climate" variants of the successful Heidelberg Wallbox Home Eco and Heidelberg Wallbox Energy Control wall charging stations, HEIDELBERG offsets CO₂ emissions by supporting the CO₂OL Tropical Mix climate protection project. The project is certified according to the renowned Gold Standard and aims to reforest a total of 13,242 ha in Panama. The offsetting takes place through so-called emission reduction credits (certificates), with which the same amount of emissions is offset by the above-mentioned climate protection project. The CO₂ footprint of a wallbox is determined from the extraction of raw materials to the finished wallbox. HEIDELBERG determines the CO₂ footprint for printing presses using the same principle which has been certified by the Fraunhofer Institut UMSICHT.
Since a large part of the production takes place in Germany, Amperfied GmbH has direct insight into the processes and can influence that the production is as resource efficient as possible. While individual components such as chips are sometimes sourced from abroad, the complete assembly of circuit boards, switchgear and ultimately the wallbox takes place at the Wiesloch-Walldorf site.
Furthermore, when selecting materials, attention is paid to their recyclability. In addition, manufacturing in Germany leads to short transport routes to end customers and thus reduced transport emissions.
The wallboxes Home Eco climate and Energy Control climate differ from the standard models by an additional graphic on the front panel. Both charging stations are available immediately with a 5-metre charging cable through Amperfied GmbH's sales partners. The RRP for the Home Eco climate wallbox is EUR 549 incl. VAT, for the Energy Control wallbox EUR 810.
By selling their GHG quota via www.amperfied.de/de/clever-laden/thg-quote/, owners of purely battery-powered vehicles in Germany can now earn 400 EUR. To this end, Amperfied GmbH is cooperating with ZusammenStromen GmbH and its "Geld für eAuto" (money for e-cars) offering. Because driving an electric car actively helps to reduce climate-damaging greenhouse gas emissions, owners of purely battery-powered vehicles (cars, motorbikes and scooters with road registration) have been able to certify the CO₂ savings of their electric vehicle since the beginning of 2022 and sell them to companies subject to quotas. The abbreviation GHG quota stands for "greenhouse gas reduction quota". It is intended to reduce the emission of greenhouse gases by making it more expensive to emit them.
Figure 1: Amperfied GmbH offsets the CO₂ footprint of the Wallbox Energy Control climate by supporting selected climate protection projects. Visually, it differs from the standard Wallbox Energy Control model by an additional graphic on the front panel.
Figure 2: CO₂ footprint of the Wallbox Home Eco climate is also compensated by Amperfied GmbH according to the “cradle-to-gate” principle, which considers the CO₂ emissions generated during production as well as the energy and transport expenses caused by suppliers.
Figure 3: Since a large part of the production takes place in Germany, Amperfied GmbH has direct insight into the processes and can influence that the production is as resource efficient as possible.
Additional details about Heidelberg wallboxes:
Internet: www.amperfied.com
E-Mail: info@amperfied.com
Wallbox Hotline: +49 6222-82-2266
For additional details about the company and image material, please visit the Press Lounge of Heidelberger Druckmaschinen AG at www.heidelberg.com and in the Media Library.
Heidelberg IR now on Twitter:
Link to the IR Twitter channel: https://twitter.com/Heidelberg_IR
On Twitter under the name: @Heidelberg_IR
This press release contains forward-looking statements based on assumptions and estimations by the Management Board of Heidelberger Druckmaschinen Aktiengesellschaft. Even though the Management Board is of the opinion that those assumptions and estimations are realistic, the actual future development and results may deviate substantially from these forward-looking statements due to various factors, such as changes in the macroeconomic situation, in the exchange rates, in the interest rates, and in the print media industry. Heidelberger Druckmaschinen Aktiengesellschaft gives no warranty and does not assume liability for any damages in case the future development and the projected results do not correspond with the forward-looking statements contained in this press release.
Pressesprecher
Tel.: +49 (0)6222 82 67123
