Contact

Obtain an offer

Technical information.

Speedmaster SX 102.

Technical data

The following table is scrollable

Printing stock
Max. sheet size 720 mm x 1,020 mm (28.35 in x 40.16 in)
Min. sheet size 340 mm x 480 mm (13.39 in x 18.90 in) straight printing
400 mm x 480 mm (15.75 in x 18.90 in) perfecting mode
Max. print format 700 mm x 1,020 mm (27.56 in x 40.16 in)
Thickness 0.03 mm - 0.60 mm (0.0012 in - 0.024 in)
Gripper margin 10 mm - 12 mm (0.39 in - 0.47 in)
Print output
Maximum 14,000 sph
Plate cylinder
Cylinder undercut 0.12 mm (0.005 in)
Distance from lead edge of plate to lead edge of print 43 mm / 52 mm (1.69 in / 2.05 in)
Plates
Length x width 790 mm x 1,030 mm (31.10 in x 40.55 in)
Thickness 0.20 mm – 0.30 mm (0.008 in –0.012 in) with AutoPlate
0.24 mm – 0.30 mm (0.009 in – 0.012 in) with AutoPlate Pro
Blanket cylinder
Length x width, blanket 840 mm x 1,052 mm (33.07 in x 41.42 in) metal-barred
Thickness blanket 1.95 mm (0.0768 in)
Length x width, packing sheet 735 mm x 1,030 mm (28.94 in x 40.55 in)
Cylinder undercut 2.30 mm (0.0906 in)
Coating blanket cylinder
Length x width, coating blanket 800 mm x 1,048 mm (31.50 in x 41.26 in), metal-barred
Length x width, coating plate 780 mm x 1,030 mm (30.71 in x 40.55 in)
Max. coating area 710 mm x 1,020 mm (27.95 in x 40.16 in)
Cylinder undercut 3.20 mm (0.1260 in)
Distance from lead edge of coating plate to lead edge of coating 43 mm (1.69 in)
Pile heights
Feeder 1,320 mm (51.97 in) incl. pile table and pile support plate
Delivery 1,295 mm (50.98 in) incl. pile table and pile support plate
Sample configuration
Basis Speedmaster SX 102-8-P with Preset Plus feeder and Preset Plus delivery
Number of printing units 8
Length 15.95 m (627.95 in)
Width 3.33 m (131.10 in)
Height 2.15 m (84.65 in)

Technical data can vary according to job, consumables, printing stock and, possible, other factors.

Further information

How can we help you?

We look forward to your message. In order to be able to react quickly to your request, we need some information. *These fields are required.