The cutter POLAR 66 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface allows an easy handling of the material even without air jets. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator.
The operation of the machine is done via an ergonomically positioned 18.5’’ touch-screen display. Recurring cutting sequences can be memorized (memory capacity 1,998 programs) and adapted at any time. With the process visualization the handling of the material is displayed graphically and so the risk of errors significantly downsized. To optimize the cutting quality the pre-clamping time can be adjusted according to the material.
Optionally, the machine can be integrated into the digital workflow via P-NET Compucut®.
| Cutting width | 670 mm (26.38 in) |
| Feeding depth | 670 mm (26.38 in) |
| Feeding height max. | 80 mm (3.15 in) |
| Clamp pressure, min. | 200 daN (441 lbs) |
| Clamp pressure, max. | 1,500 daN (3,307 lbs) |
| Backgauge speed on return way (0 - ...) | 70 mm/sec (2.76 in/sec) |
| Smallest cut, automatically, without false plate | 15 mm (0.59 in) |
| Smallest cut, automatically, with false plate | 50 mm (1.97 in) |
| Dimensions (w × d × h) | 1,250 × 1,825 × 1,500 mm (49.21 × 71.85 × 59.06 in) |
The cutter POLAR 80 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface equipped with air jets allows an easy handling of the material. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator.
The operation of the machine is done via an ergonomically positioned 18.5’’ touch-screen display. Recurring cutting sequences can be memorized (memory capacity 1,998 programs) and adapted at any time. With the process visualization the handling of the material is displayed graphically and so the risk of errors significantly downsized. To optimize the cutting quality the pre-clamping time can be adjusted according to the material.
Optionally, the machine can be integrated into the digital workflow via P-NET Compucut
| Cutting width | 800 mm (31.50 in) |
| Feeding depth | 800 mm (31.50 in) |
| Feeding height max. | 100 mm (3.94 in) |
| Clamp pressure, min. | 180 daN (397 lbs) |
| Clamp pressure, max. | 2,700 daN (5,952 lbs) |
| Backgauge speed on return way (0 - ...) | 130 mm/sec (5.12 in/sec) |
| Smallest cut, automatically, without false plate | 15 mm (0.59 in) |
| Smallest cut, automatically, with false plate | 50 mm (1.97 in) |
| Dimensions (w × d × h) | 1,500 × 1,970 × 1,500 mm (61.02 × 77.56 × 59.06 in) |
| Weight | 900 kg (1,984 lbs) |
| Electrical power input (apparent power) | 4.0 kVA |
