This makes it significantly more productive, especially when using films and thin materials.
CutStar. Short makeready times and high printing speed.
With its completely redesigned platform, CutStar stands for even more automation, simple handling and ease of maintenance. This makes it much more productive, particularly when using foils and thin materials.
As a wide web sheeter, the CutStar is the ideal complement for processing thin label papers or films at high production speeds. Now in its fourth generation, the CutStar has a completely new, maintenance-friendly design that also reduces makeready times. Its high level of automation, combined with integration into the Prinect workflow, can cut makeready times by up to 50 percent. Extensive preset values for different substrates now ensure significantly accelerated makeready times when changing materials. Manual settings such as the format length setting are no longer required.
Increasing customer requirements, particularly for processing thin substrates such as label papers and in-mold foils, were the catalyst for developing a new CutStar - the focus was on higher print speeds, more stable sheet travel, greater automation, easier handling, and greater ease of maintenance. Integration with the Push to Stop and Intellistart functions of the press makes the CutStar unique. The press and CutStar communicate continuously with each other.
This means that important information about the CutStar can be displayed directly to the operator on the machine's wallscreen. During job changes, the CutStar can be disconnected from the feeder at the touch of a button. This makes it easy to switch production from processing reel stock to sheets. The next job can then be printed directly from the pile instead of from the roll.
With the 4th generation CutStar, production speed for thin substrates has been increased by 30% and the range of applications for particularly thin materials (foils from 40µm and paper from 30g/m²) has been significantly expanded.
Efficient production of labels thanks to:
Package inserts are an important part of any pharmaceutical or cosmetic product packaging. However, they are also diverse and demanding to produce. The increasing information content goes hand in hand with growing space requirements and therefore printing on the very thinnest of materials.
The 4th generation CutStar is an excellent solution to the special challenges posed by thin materials. Papers from 30g/m² can be processed without any problems.
Efficient production of package inserts thanks to:
High production speeds with reduced number of pile changes and fewer wash-up cycles, increase net output. Waste reduction, the optimum format, and lower roll prices ensure cost-effective and competitive production. The flexible use of the 4th generation CutStar enables a wide range of jobs from particularly thin materials such as paper from 30 gsm up to cardboard up to 300 gsm and is economical - for both short and long runs.
Efficient production of commercial jobs thanks to:
“The biggest benefit CutStar offers us is the high level of flexibility when using lower paper grammages than in the past. We now process lightweight papers with 32 g/m2 compared with the 40-70 g/m2 paper normally used. Another plus point is the ability to optimize paper consumption by trimming the paper to the necessary formats, which reduces waste."
Paola Pantaleoni, Managing Director Grafiche Pizzi, Italy
The Speedmaster 2020 generation uses the immense
spectrum of digital possibilities like no other printing press generation before it.
Now is your opportunity to take advantage of this new potential
and write your success story with us.
We look forward to your message. In order to be able to react quickly to your request, we need some information.
*These fields are required.