Up to 20% more output adverse a high-speed cutter without peripheral equipment
The POLAR CuttingSystem 120, which is loaded manually and stacks the cut labels onto the pallet, is usually employed as a simple cutting system for unprinted cutting material.
The system can also be retrofitted with peripheral equipment to meet further demands.
Up to 60% more output adverse a high-speed cutter without peripheral equipment
The POLAR CuttingSystem 160 with exact preparing of the cutting material, manual loading and manual lowering the cut products on the pallet, is usually employed as a simple cutting system for printed cutting material.
The system can also be retrofitted with peripheral equipment to meet further demands.
Up to 100% more output adverse a high-speed cutter without peripheral equipment
POLAR's best-selling cutting system prepares the material to be cut with great precision, loads it manually and unloads the labels automatically onto pallets to ensure a perfect flow of material in the cutting process. Almost 100 percent extra performance when compared to a stand-alone machine provides an excellent increase in efficiency.
The system can also be retrofitted with peripheral equipment to meet further demands.
Compared with a manual system, this system increases the output up to 100 %, or reduces labour costs by saving one person
The Autoturn turning gripper with automatic aligning gauge is the centre of the PACE cutting system. The gripper system turns the ream on the rear table, either 90 or 180 degrees, to the right or left-hand side. Then an automatic gauge positions the ream. The cut is released automatically. In this way, undivided reams can be cut without any operator. If further cuts are needed, the operator continues the cutting job and turns the individual products manually.
A POLAR Autotrim high-speed cutter, which automatically removes the cutting waste, is a precondition for this highly automated PACE cutting system.
The unloading Transomat makes it much easier to unload the high-speed cutter. This optimizes the entire workflow. The intermediate and final products are manually pushed onto the Transomat transport pallet. In automatic cycles, they are precisely stacked on the pallet.
Cutting system with automated loading and unloading processes
This system is usually employed for dealing with material that requires no jogging before it is cut. The automatic loading of material, as well as the automatic unloading of completely cut labels onto pallets, increases the productivity of this cutting system by up to 200 percent compared to a high-speed cutter without any peripheral equipment.