Contact

Obtain an offer

Technical Data.

Speedmaster XL 145 & XL 162.

Technical Data Speedmaster XL 145

Technical data

The following table is scrollable

Printing stock
Max. sheet size 1,060 mm x 1,450 mm (41.73 in x 57.09 in)
Min. sheet size 610 mm x 860 mm (24.02 in x 33.86 in) straight printing
700 mm x 1,000 mm (27.56 in x 39.37 in) perfecting mode
Max. print format 1,040 mm x 1,450 mm (40.94 in x 57.09 in) straight printing
1,037 mm x 1,432 mm (40.87 in x 56.38 in) perfecting mode
Thickness 0.06 mm - 1.60 mm1 (0.0024 in - 0.063 in1) straight printing
0.06 mm - 0.60 mm1 (0.0024 in - 0.024 in1) perfecting mode
Gripper margin 10 mm - 12 mm (0.39 in – 0.47 in) (thickness <0.8 mm/0.03 in)
11 mm - 12 mm (0.43 in – 0.47 in) (thickness >0.8 mm/0.03 in)
12 mm - 13 mm (0.47 in - 0.51 in) rear edge perfecting mode
Print output
Maximum 15,000 sph (standard)
12,000 sph (perfecting mode)
16,500 sph2 (Packaging Speed Performance)
18,000 sph2 (Packaging Speed Performance)
Plate cylinder
Cylinder undercut 0.25 mm (0.0098 in)
Distance from lead edge of plate to lead edge of print 75 mm (2.95 in)
Plates
Length x width 1,175 mm x 1,460 mm (46.26 in x 57.48 in)
Thickness 0.40 mm (0.016 in)
Blanket cylinder
Length x width, blanket 1,162 mm x 1,480 mm (45.75 in x 58.27 in)
Thickness blanket 1.95 mm (0.077 in)
Length x width, packing sheet 1,070 mm x 1,460 mm (42,13 in x 57,48 in)
Cylinder undercut 2.30 mm (0.091 in)
Coating blanket cylinder
Length x width, coating blanket 1,162 mm x 1,480 mm (45.75 in x 58.27 in) metal-barred
Length x width, coating plate 1,152 mm x 1,460 mm (45.35 in x 57.48 in)
Thickness coating blanket 1.95 mm (0.077 in)
Max. coating area 1,040 mm x 1,450 mm (40.945 in x 57.09 in)
Cylinder undercut 3.20 mm (0.13 in)
Distance from lead edge of coating plate to lead edge of coating 57.70 mm (2.27 in)
Pile heights
Feeder 1,550 mm (61.02 in) incl. pile table and pile support plates
Delivery 1,550 mm (61.02 in) incl. pile table and pile support plates

Technical data can vary according to job, consumables, printing stock and, possible, other factors.

1Depending on the printing stock range extension
2Not available for double-coating configurations

Technical Data Speedmaster XL 162

Technical data

The following table is scrollable

Printing stock
Max. sheet size 1,210 mm x 1,620 mm (47.64 in x 63.78 in)
Min. sheet size 610 mm x 860 mm (24.02 in x 33.86 in) straight printing
700 mm x 1,000 mm (27.56 in x 39.37 in) perfecting mode
Max. print format 1,190 mm x 1,620 mm (46.85 in x 63.78 in) straight printing
1,188 mm x 1,602 mm (46.77 in x 63.07 in) perfecting mode
Thickness 0.06 mm - 1.60 mm1 (0.0024 in - 0.063 in1) straight printing
0.06 mm - 0.60 mm1 (0.0024 in - 0.024 in1) perfecting mode
Gripper margin 10 mm - 12 mm (0.39 in – 0.47 in) (thickness <0.8 mm/0.03 in)
11 mm - 12 mm (0.43 in – 0.47 in) (thickness >0.8 mm/0.03 in)
12 mm - 13 mm (0.47 in - 0.51 in) rear edge perfecting mode
Print output
Maximum 15,000 sph (standard)
12,000 sph (perfecting mode)
16,500 sph2 (Packaging Speed Performance)
Plate cylinder
Cylinder undercut 0.25 mm (0.0098 in)
Distance from lead edge of plate to lead edge of print 75 mm (2.95 in)
Plates
Length x width 1,325 mm x 1,630 mm (52.17 in x 64.17 in)
Thickness 0.40 mm (0.016 in)
Blanket cylinder
Length x width, blanket 1,311 mm x 1,668 mm (51.61 in x 65.67 in)
Thickness blanket 1.95 mm (0.077 in)
Length x width, packing sheet 1,220 mm x 1,630 mm (57,09 in x 64,17 in)
Cylinder undercut 2.30 mm (0.091 in)
Coating blanket cylinder
Length x width, coating blanket 1,311 mm x 1,668 mm (51.61 in x 65.67 in) metal-barred
Length x width, coating plate 1,299 mm x 1,630 mm (51.14 in x 64.17 in)
Thickness coating blanket 1.95 mm (0.077 in)
Max. coating area 1,190 mm x 1,620 mm (46.85 in x 63.78 in)
Cylinder undercut 3.20 mm (0.13 in)
Distance from lead edge of coating plate to lead edge of coating 57.70 mm (2.27 in)
Pile heights
Feeder 1,550 mm (61.02 in) incl. pile table and pile support plates
Delivery 1,550 mm (61.02 in) incl. pile table and pile support plates

Technical data can vary according to job, consumables, printing stock and, possible, other factors.

1Depending on the printing stock range extension
2Not available for double-coating configurations

Further information

How can we help you?

We look forward to your message. In order to be able to react quickly to your request, we need some information. *These fields are required.