Technical Data.

Speedmaster XL 75.

Technical Data Speedmaster XL 75 C-Format

Technical Data

The following table is scrollable

Printing stock
Max. sheet size 530 mm x 750 mm (20.87 in x 29.53 in)
Min. sheet size 280 mm x 350 mm (11.02 in x 13.78 in) straight printing
300 mm x 350 mm (11.81 in x 13.78 in) in perfecting mode
Max. print format 510 mm x 740 mm (20.08 in x 29.13 in)
Thickness 0.03 mm - 0.80 mm (0.0012 in - 0.031 in)
Gripper margin 8 mm – 10 mm (0.31 in - 0.39 in)
Print output
Maximum 15,000 sph (standard)
18,000 sph (option on straight printing presses)
Plate cylinder
Cylinder undercut 0.12 mm (0.005 in)
Distance from lead edge of plate to lead edge of print 59.50 mm (2.34 in)
Plates
Length x width 605 mm x 745 mm (23.82 in x 29.33 in)
Thickness 0.30 mm (0.012 in)
Blanket cylinder
Length x width, blanket 700 mm x 772 mm (27.56 in x 30.39 in) metal-barred
Thickness blanket 1.95 mm (0.0768 in)
Length x width, packing sheet 620 mm x 750 mm (24.41 in x 29.53 in)
Cylinder undercut 2.30 mm (0.0906 in)
Coating blanket cylinder
Length x width, coating blanket 700 mm x 772 mm (27.56 in x 30.39 in) metal-barred
Length x width, coating plate 680 mm x 750 mm (26.77 in x 29.53 in)
Max. coating area 585 mm x 740 mm (23.03 in x 29.13 in)
Cylinder undercut 3.20 mm (0.1260 in)
Distance from lead edge of coating plate to lead edge of coating 47.60 mm (1.87 in)
Pile heights
Feeder 1,120 mm (44.09 in) incl. pile support plate and pile board, elevated +550 mm (+21.65 in)
Delivery 1,120 mm (44.09 in) incl. pile support plate and pile board, elevated +550 mm (+21.65 in)
Sample configuration
Basis Speedmaster XL 75-5+L with Preset Plus Feeder and Preset Plus Delivery with two extension modules
Number of printing units 5
Number of coating units 1
Length 12.41 m (488.58 in)
Width 3.31 m (130.31 in)
Height 2.00 m (78.74 in)

Technical data can vary according to job, consumables, printing stock and, possible, other factors.

Technical Data Speedmaster XL 75 F-Format

Technical Data

The following table is scrollable

Printing stock
Max. sheet size 605 mm x 750 mm (23.82 in x 29.53 in)
Min. sheet size 280 mm x 350 mm (11.02 in x 13.78 in) straight printing
340 mm x 350 mm (13.39 in x 13.78 in) in perfecting mode
Max. print format 585 mm x 740 mm (23.03 in x 29.13 in)
Thickness 0.03 mm - 0.80 mm (0.0012 in - 0.031 in)
Gripper margin 8 mm - 10 mm (0.31 in - 0.39 in)
Print output
Maximum 15,000 sph (standard)
18,000 sph (option straight printing presses)
Plate cylinder
Cylinder undercut 0.12 mm (0.005 in)
Distance from lead edge of plate to lead edge of print 43 mm (1.69 in)
Plates
Length x width 660 mm x 745 mm (25.98 in x 29.33 in)
Thickness 0.30 mm (0.012 in)
Blanket cylinder
Length x width, blanket 700 mm x 772 mm (27.56 in x 30.39 in) metal-barred
Thickness blanket 1.95 mm (0.0768 in)
Length x width, packing sheet 620 mm x 750 mm (24.41 in x 29.53 in)
Cylinder undercut 2.30 mm (0.0906 in)
Coating blanket cylinder
Length x width, coating blanket 700 mm x 772 mm (27.56 in x 30.39 in) metal-barred
Length x width, coating plate 680 mm x 750 mm (26.77 in x 29.53 in)
Max. coating area 585 mm x 740 mm (23.03 in x 29.13 in)
Cylinder undercut 3.20 mm (0.1260 in)
Distance from lead edge of coating plate to lead edge of coating 47.60 mm (1.87 in)
Pile heights
Feeder 1,120 mm (44.09 in) incl. pile support plate and pile board, elevated +550 mm (+21.65 in)
Delivery 1,120 mm (44.09 in) incl. pile support plate and pile board, elevated +550 mm (+21.65 in)
Sample configuration
Basis Speedmaster XL 75-5+L with Preset Plus Feeder and Preset Plus Delivery with two extension modules
Number of printing units 5
Number of coating units 1
Length 12.41 m (488.58 in)
Width 3.31 m (130.31 in)
Height 2.00 m (78.74 in)

Technical data can vary according to job, consumables, printing stock and, possible, other factors.

Further Information

  • Speedmaster XL 75 Anicolor

    Anicolor Inking-Unit Technology

    90-50-50 – the benchmark for less waste sheets, shortest make ready time and highest productivity
    More

  • hybrid_uv_drip_off

    Applications

    Special Applications require a high level of production knowledge for an economical production.
    More

  • industrial_print

    Industrialized Production

    The best result for the best price – this is only possible with a lean production thanks to optimized processes.
    More

Get in touch.

Your dialog with Heidelberg.

Ohr und Sprechblase in HDM-Farben

We look forward to hearing from you!

Get in touch with us for more information, a customized offer and everything else about Heidelberg.


Contact