Technical Data.

Speedmaster XL 145 & XL 162.

Technical Data Speedmaster XL 145

Technical Data

The following table is scrollable

Printing stock
Max. sheet size 1,060 mm x 1,450 mm (41.73 in x 57.09 in)
Min. sheet size 630 mm x 860 mm (24.80 in x 33.86 in) straight printing
700 mm x 1,000 mm (27.56 in x 39.37 in) perfecting mode
Max. print format 1,040 mm x 1,450 mm (40.94 in x 57.09 in) straight printing
1,038 mm x 1,432 mm (40.87 in x 56.38 in) perfecting mode
Thickness 0.06 mm - 1.60 mm1 (0.0024 in - 0.063 in1) straight printing
0.06 mm - 0.60 mm1 (0.0024 in - 0.024 in1) perfecting mode
Gripper margin 10 mm (0.39 in)
12 mm (0.47 in) rear edge perfecting mode
Print output
Maximum 15,000 sph (standard)
12,000 sph (perfecting mode)
16,500 sph2 (Packaging Speed Performance)
18,000 sph2 (Packaging Speed Performance)
Plate cylinder
Cylinder undercut 0.25 mm (0.0098 in)
Distance from lead edge of plate to lead edge of print 75 mm (2.95 in)
Plates
Length x width 1,175 mm x 1,460 mm (46.26 in x 57.48 in)
Thickness 0.40 mm (0.016 in)
Blanket cylinder
Length x width, blanket 1,162 mm x 1,480 mm (45.75 in x 58.27 in)
Thickness blanket 1.95 mm (0.077 in)
Length x width, packing sheet 1.070 mm x 1.460 mm (42,13 in x 57,48 in)
Cylinder undercut 2.30 mm (0.091 in)
Coating blanket cylinder
Length x width, coating blanket 1,162 mm x 1,480 mm (45.75 in x 58.27 in) metal-backed
Length x width, coating plate 1,152 mm x 1,460 mm (45.35 in x 57.48 in)
Max. coating area 1.040 mm x 1.450 mm (40,945 in x 57.09 in)
Cylinder undercut 3.20 mm (0.13 in)
Distance from lead edge of coating plate to lead edge of coating 57.70 mm (2.27 in)
Pile heights
Feeder 1,550 mm (61.02 in) incl. pile table and pile support plates
Delivery 1,550 mm (61.02 in) incl. pile table and pile support plates

Technical data can vary according to job, consumables, printing stock and, possible, other factors.

1Depending on the printing stock range extension
2Not available for double-coating configurations

Technical Data Speedmaster XL 162

Technical Data

The following table is scrollable

Printing stock
Max. sheet size 1,210 mm x 1,620 mm (47.64 in x 63.78 in)
Min. sheet size 630 mm x 860 mm (24.80 in x 33.86 in) straight printing
700 mm x 1,000 mm (27.56 in x 39.37 in) perfecting mode
Max. print format 1,190 mm x 1,620 mm (46.85 in x 63.78 in) straight printing
1,188 mm x 1,602 mm (46.77 in x 63.07 in) perfecting mode
Max. print format 585 mm x 740 mm (23.03 in x 29.13 in)
Thickness 0.06 mm - 1.60 mm1 (0.0024 in - 0.063 in1) straight printing
0.06 mm - 0.60 mm1 (0.0024 in - 0.024 in1) perfecting mode
Gripper margin 10 mm (0.39 in)
12 mm (0.47 in) rear edge perfecting mode
Print output
Maximum 15,000 sph (standard)
12,000 sph (perfecting mode)
16,500 sph2 (Packaging Speed Performance)
Plate cylinder
Cylinder undercut 0.25 mm (0.0098 in)
Distance from lead edge of plate to lead edge of print 75 mm (2.95 in)
Plates
Length x width 1,325 mm x 1,630 mm (52.17 in x 64.17 in)
Thickness 0.40 mm (0.016 in)
Blanket cylinder
Length x width, blanket 1,311 mm x 1,668 mm (51.61 in x 65.67 in)
Length x width, packing sheet 1,220 mm x 1,630 mm (57,09 in x 64,17 in)
Cylinder undercut 2.30 mm (0.091 in)
Coating blanket cylinder
Length x width, coating blanket 1,311 mm x 1,668 mm (51.61 in x 65.67 in) metal-backed
Length x width, coating plate 1,299 mm x 1,630 mm (51.14 in x 64.17 in)
Max. coating area 1.190 mm x 1.620 mm (46,85 in x 63,78 in)
Cylinder undercut 3.20 mm (0.13 in)
Distance from lead edge of coating plate to lead edge of coating 57.70 mm (2.27 in)
Pile heights
Feeder 1,550 mm (61.02 in) incl. pile table and pile support plates
Delivery 1,120 mm (44.09 in) incl. pile support plate and pile board, elevated +550 mm (+21.65 in)
Delivery 1,550 mm (61.02 in) incl. pile table and pile support plates

Technical data can vary according to job, consumables, printing stock and, possible, other factors.

1Depending on the printing stock range extension
2Not available for double-coating configurations

Equipment

The following table is scrollable

XL 145-4-8
XL 162-4-8
XL 145-4-8+L
XL 162-4-8+L
XL 145-4-8+LYYL
XL 162-4-8+LYYL
XL 145-8-P
XL 162-8-P
Prinect
Prinect Press Center
Prinect Axis Control o o o o
Prinect Inpress Control o o o o
Prinect wallscreen o o o o
Feeder
Preset Plus Feeder
Non-stop feeder - manual o o o -
Non-stop feeder - automatic o o o -
Printing Unit
AutoPlate XL o o o o
Speed-compensated air settings controlled by characteristic curves
CombiStar
Disconnectable inking unit (for simultaneous washing) o o o o
Inking unit temperature control with two water circuits for ink fountain roller and ink distributor o o o o
Color Assistant Pro o o o o
Remote fan-out control in circumferential and lateral directions o o o o
Impression cylinder washup device o o o o
Coating Unit
Chambered blade - -
Pressurized chamber doctor blade - o o -
Coating supply unit 750 l/h (hose pump) - -
Coating Star/Coating Star Compact - o o -
Pneumatic screen roller changeover system - -
Delivery
Preset Plus Delivery with 8.2 m (322.84 in) drying section
Preset Plus Delivery with 9.7 m (381.89 in) drying section o o o -
Preset Plus Delivery with 11.3 m (444.88 in) drying section o o o -
Twin gripper delivery - - -
Non-stop delivery - fully automatic o o o -
CleanStar/CleanStar Compact o o o o
Dynamic sheet brake o o o -
PowderStar AP 232/PowderStar AP 500 o o o o
Central trim attachment o o o -
UV
UV interdeck drying o o o o
UV delivery drying o o o o
Additional equipment options
Commercial/Publishing printing stock range extension o o - o
Packaging Extended printing stock range extension o o o -
Energy measuring device o o o o
StaticStar Compact/StaticStar Advanced o o o o
Elevated press (582 mm/22.91 in) o o o -
Pallet logistics (various configurations) - o o -
DryStar Combination dryer o o o o
DryStar LYYL dryer - - -

= Standard
= Option
= Option on request
= Not available

The combination of individual features may differ from country to country. This link only represents a selection of available features.

Featured Content

  • industrial_print

    Industrialized Production

    The best result for the best price – this is only possible with a lean production thanks to optimized processes.
    More

  • hdm2014121_packagingdays_lfd4785

    Folding Box production

    A differentiated purchasing behavior results in a very broad range of offers and demands solutions from the supplier
    More

  • ccg_00032_xl_106_glaeserne_a4_1000

    Star System

    Short make ready times, maximum productivity - to achieve this, all the components that go to make up a press must be perfectly coordinated.
    More

Stay in touch.

Contact Heidelberg

Ohr und Sprechblase in HDM-Farben

We look forward to hearing from you!

Contact us for more information about Heidelberg and Heidelberg products.


Contact Heidelberg Canada Graphic Equipment Limited