Drip-off and Hybrid Coatings |
 |
Drip-off
Conventional inks are used for the process colors. A special-effect print varnish is applied in the final printing unit to the areas that are to have a matt appearance. Next, the coating unit is used to apply a conventional full-area high-gloss coating that drips off the areas previously given a matt coating. This maintains the matt effect of these areas and gives the remaining areas a gloss surface.
Hybrid
Hybrid or UV inks are used for the process colors. A further printing unit is used to apply a UV special-effect print varnish to the parts of the motif that are to have a matt appearance. Next, the coating unit is used to apply a full-area UV high-gloss coating. Because a UV high-gloss coating is used for hybrid applications, a higher gloss level can be achieved than with a drip-off application produced using a conventional, water-based high-gloss coating. With hybrid applications, however, the structure of the matt effect is stronger than with drip-off applications. This surface with a less homogeneous appearance is created because the UV coating absorbed is glossier than the conventional coating which has been repelled.
|
|
|
|
|
 |
|
Packaging Print from Heidelberg
See how the carton shown above was prepared, printed, finished and assembled using Heidelberg solutions every step of the way.
 Watch the Video
|
|
|