CutStar - the Advantages of Web Offset in Sheetfed Offset. |
 |
The CutStar short-grain sheeter offers you the best of both worlds - the cost benefits of web offset and the flexibility of sheetfed offset. CutStar is installed right in front of the feeder. It allows you to process stock weights of between 40 and 300 gsm. The printing stock is unwound from the reel, cut to the required format in CutStar and then shingled. The stream of shingled stock is then fed into the feeder.
CutStar allows you to use inexpensive reel stock rather than more costly sheeted stock, saving you up to 15 percent. With special printing materials such as foils or aluminized paper, the saving is often even greater.
When starting a new job, either the reel can be changed in a matter of minutes or CutStar can be disengaged from the feeder at the touch of a button. A motor moves the CutStar cutting unit to one side to allow easy access to the feeder. The press can then continue working in sheetfed mode.
The high level of automation and CANopen make CutStar extremely simple to operate.
|
|
|
|
|
|
|
|
|
Solutions
Heidelberg offers open and scalable solutions for all the challenges in the print media industry. For family busi- nesses as well as for large industrial plants, for pre- press specialists as well as for print finishers. Heidelberg is there for you at each stage of the pro- cess with state-of-the-art products and services. We know that our customers' success is our success. On these pages you will find some example configura- tions, which will make your business even more suc- cessful.
 Overview
|
|
|