New Modules for Folders and Saddlestitchers Increase Added Value in Postpress
11/23/2006
- New Inline Punch PT 220 on Stahlfolder Flexomailer and Stitchmaster saddlestitchers gives a variety of finishing options
- New vacuum tables for Stahlfolder Flexomailer provide a cost-effective introduction to mailing production
- New cardtipper for Stahlfolder Flexomailer dispenses materials at high speed and with precise positioning
Inline Punch PT 220
The fully automatic Inline Punch PT 220 punches folded and single sheets after the folder or saddlestitcher. The maximum speed is up to 10,500 copies per hour, depending on the product length and thickness. The maximum format size is 800 x 220 millimeters (31.5 x 8.67 inches) and the minimum 100 x 80 millimeters (3.94 x 3.15 inches). The PT 220 accommodates a wide variety of finishing options - from tear-off/corner perforation, Wire-O punching and file hole punching to central, register and three-sided cutting and (bandsteel) die cutting for special shapes. The product thicknesses processed are six millimeters (0.236 inch) for cutting, three millimeters (0.118 inch) for perforation and two millimeters (0.079 inch) for the cutting die.
The fully automatic Inline Punch PT 220 punches folded and single sheets after the folder or saddlestitcher. The maximum speed is up to 10,500 copies per hour, depending on the product length and thickness. The maximum format size is 800 x 220 millimeters (31.5 x 8.67 inches) and the minimum 100 x 80 millimeters (3.94 x 3.15 inches). The PT 220 accommodates a wide variety of finishing options - from tear-off/corner perforation, Wire-O punching and file hole punching to central, register and three-sided cutting and (bandsteel) die cutting for special shapes. The product thicknesses processed are six millimeters (0.236 inch) for cutting, three millimeters (0.118 inch) for perforation and two millimeters (0.079 inch) for the cutting die.
The Inline Punch PT 220 is a beam cutting press. Sheets are
transferred directly from the folder or saddlestitcher using a
height-adjustable infeed belt. A pneumatic alignment system
positions the sheet accurately in the machine, ensuring precision
punching.
Vacuum tables
There are specially tailored mailing tables for the Flexomailer TH 56 (working width: 56 centimeter/22 inches) and the Flexomailer TH 82 (working width: 82 centimeters/32 inches). Each comes in lengths of two meters (79 inches) and 3.30 meters (130 inches). They provide a cost-effective introduction to one-up and two-up production. The mailing table serves as a basic module, with add-on units such as an inkjet station, cardtipper, sample dispenser, labeler and plow folder for turning over flaps.
The mailing products are transported by movable suction tapes which guide them with absolute precision. The mailing table is easy to use, offering great flexibility and a wide variety of applications. It has electric height adjustment and rollers allow it to be used anywhere on the Flexomailer.
There are specially tailored mailing tables for the Flexomailer TH 56 (working width: 56 centimeter/22 inches) and the Flexomailer TH 82 (working width: 82 centimeters/32 inches). Each comes in lengths of two meters (79 inches) and 3.30 meters (130 inches). They provide a cost-effective introduction to one-up and two-up production. The mailing table serves as a basic module, with add-on units such as an inkjet station, cardtipper, sample dispenser, labeler and plow folder for turning over flaps.
The mailing products are transported by movable suction tapes which guide them with absolute precision. The mailing table is easy to use, offering great flexibility and a wide variety of applications. It has electric height adjustment and rollers allow it to be used anywhere on the Flexomailer.
Cardtipper
The new cardtipper is a module for dispensing products such as coupons, booklets and other types of cards made from paper, cardboard or plastic. It can process sizes ranging from 3 x 4 centimeters (1.18 x 1.57 inches) to 32 x 40 centimeters (12.60 x 15.75 inches) and a product thickness of 30 millimeters (1.18 inches). Its height is infinitely adjustable, as is its position - either in the direction of travel or perpendicular to it. Simple operation and format adjustment without the use of tools ensure short make-ready times when changing products. A suction tape which is precisely synchronized with the folding station or mailing table transports the products. Even at high speeds of up to 120 meters (around 400 feet) per minute, consistently accurate positioning is achieved. Once dispensed, the product is fixed using soluble fugitive glue. It can thus be separated at any time without being damaged.
Image 1: Punch PT 220 (large)
The new Inline Punch PT 220 gives the Stahlfolder Flexomailer and Stitchmaster saddlestitchers a wide variety of finishing options such as tear-off/corner perforation, central, register and three-sided cutting and (bandsteel) die cutting for special shapes.
Image 2: Punch PT 220 with Flexomailer
The Inline Punch PT 220 is a beam cutting press which is connected directly after the Stahlfolder Flexomailer. The maximum speed is up to 10,500 copies per hour, depending on the product length and thickness.
Image 3: Mailing table
The mailing table for a working width of 56 centimeters (22 inches) provides a cost-effective introduction to one-up and two-up production of advertising materials. It serves as a basic module for units such as the new cardtipper, which dispenses all kinds of different products.
Image 4: Close-up of cardtipper
The new cardtipper is a module for dispensing products such as coupons, booklets and other types of cards made from paper, cardboard or plastic.
Further information for journalists:
Heidelberger Druckmaschinen AG
Corporate Communications
Hilde Weisser
Tel.: +49 (0)6221 92 50 66
Fax: +49 (0)6221 92 50 46
E-mail: hilde.weisser@heidelberg.com
The new cardtipper is a module for dispensing products such as coupons, booklets and other types of cards made from paper, cardboard or plastic. It can process sizes ranging from 3 x 4 centimeters (1.18 x 1.57 inches) to 32 x 40 centimeters (12.60 x 15.75 inches) and a product thickness of 30 millimeters (1.18 inches). Its height is infinitely adjustable, as is its position - either in the direction of travel or perpendicular to it. Simple operation and format adjustment without the use of tools ensure short make-ready times when changing products. A suction tape which is precisely synchronized with the folding station or mailing table transports the products. Even at high speeds of up to 120 meters (around 400 feet) per minute, consistently accurate positioning is achieved. Once dispensed, the product is fixed using soluble fugitive glue. It can thus be separated at any time without being damaged.
Image 1: Punch PT 220 (large)
The new Inline Punch PT 220 gives the Stahlfolder Flexomailer and Stitchmaster saddlestitchers a wide variety of finishing options such as tear-off/corner perforation, central, register and three-sided cutting and (bandsteel) die cutting for special shapes.
Image 2: Punch PT 220 with Flexomailer
The Inline Punch PT 220 is a beam cutting press which is connected directly after the Stahlfolder Flexomailer. The maximum speed is up to 10,500 copies per hour, depending on the product length and thickness.
Image 3: Mailing table
The mailing table for a working width of 56 centimeters (22 inches) provides a cost-effective introduction to one-up and two-up production of advertising materials. It serves as a basic module for units such as the new cardtipper, which dispenses all kinds of different products.
Image 4: Close-up of cardtipper
The new cardtipper is a module for dispensing products such as coupons, booklets and other types of cards made from paper, cardboard or plastic.
Further information for journalists:
Heidelberger Druckmaschinen AG
Corporate Communications
Hilde Weisser
Tel.: +49 (0)6221 92 50 66
Fax: +49 (0)6221 92 50 46
E-mail: hilde.weisser@heidelberg.com
rtf Document
If your browser displays the file instead of downloading, choose 'Save As' from your browser's 'File' menu. Download (671 KB)
