-
"FOCUS 2012" aims to deliver operating result of around EUR
150 million in financial year 2013/14
-
Measures initiated to reduce capacity and cut sales,
marketing, and structural costs
-
Up to 2,000 job cuts planned worldwide
-
Business in third quarter of 2011/12 in line with
expectations in difficult economic environment
-
Growth opportunities by focusing on market trends at drupa
2012
As announced in November 2011, the Management Board of
Heidelberger Druckmaschinen AG (Heidelberg) has agreed on the
"FOCUS 2012" efficiency program to achieve the company's
profitability targets. The aim is to ensure that the target
operating result before special items of around EUR 150 million is
still achieved in financial year 2013/14 and the company can
independently continue to build on its leading position in the
future.
"FOCUS 2012" - a comprehensive package of measures
The objective of the "FOCUS 2012" efficiency program is
to help significantly reduce capacities and costs at Heidelberg
over the next two years. This will lay the foundation for positive
business developments in response to the volatile environment and
changing market requirements. Most of the measures will be
initiated and implemented quickly before the end of calendar year
2012. In addition, the program includes a number of medium- to
long-term measures aimed at adapting the entire organization to the
changed structures.
The target is to achieve total sustainable savings of around
EUR 180 million in financial year 2013/14. Depending on the results
of negotiations with employee representatives and other factors,
the non-recurring expenditure required to do so is estimated at up
to EUR 150 million.
"The ongoing economic uncertainties will continue to put a
brake on the industry's recovery. We are seeing weaker demand
in industrialized nations but stronger growth potential in emerging
markets," said Heidelberg CEO Bernhard Schreier. "FOCUS 2012 will
position Heidelberg accordingly, above all by significantly
reducing production capacities and by adjusting sales activities to
the regional market changes. This will create the basis and
efficient structures needed for profitable business development,"
he added.
Among the short-term measures,
production capacities will be reduced by around 15 percent
and
service capacities in the regions will be adapted in line
with the expected medium-term level of sales.
Research and development expenditures will be cut by
reducing capacities, further optimizing internal R&D processes,
and reprioritizing projects.
Sales, marketing, and structural costs will also be reduced
substantially by pooling sales and marketing activities and
restructuring individual markets. Comprehensive support for the
global customer base will still be ensured. The entire package of
measures will have an impact on the global
headcount of Heidelberg. Subject to talks with employee
representatives, up to 2,000 jobs will be cut worldwide. Based on
current plans, around 1,200 production, development,
administrative, sales, and marketing jobs in Germany and around 800
jobs outside Germany will go. At December 31, 2011, Heidelberg had
15,666 employees worldwide (incl. trainees).
Preliminary results for the 3rd quarter
As expected, the economic uncertainties have made the
industry more reluctant to invest and resulted in weaker demand.
The interim insolvency of a competitor is exacerbating this
situation.
Based on preliminary calculations,
incoming orders in the third quarter of financial year
2011/12 (October 1 to December 31, 2011) totaled around EUR 640
million and sales around EUR 630 million, which is in line with the
scaled-down expectations. Preliminary incoming orders at Heidelberg
are down on the previous quarter's figure of EUR 668 million,
while preliminary sales match the figure for the previous quarter
(EUR 636 million). The third quarter's preliminary
operating result (EBIT) excluding special items is just in
the black again at around EUR 2 million (previous quarter: EUR 5
million). After nine months, despite sales falling slightly
compared to the previous year, Heidelberg has succeeded in
improving the operating result excluding special items to EUR -19
million (previous year: EUR -26 million). As a result, the company
is still planning to achieve a noticeably better operating result
excluding special items for financial year 2011/12 as a whole than
in the previous year. The preliminary
free cash flow in the third quarter almost broke even at EUR
-4 million (previous quarter: EUR -12 million). This kept the net
debt at a relatively low level and, at December 31, 2011, it was
virtually unchanged from the previous quarter at around EUR 275
million.
Growth opportunities by focusing on market trends at drupa 2012
Set against structural changes in the media and
communication market, two clear developments are emerging. On the
one hand, traditional print applications such as the newspaper and
magazine segment are showing significant evidence of decline in the
West while, on the other, marked growth is anticipated in areas
such as the packaging market, short runs, print-on-demand, and
web-to-print. Print production is also on the increase in the
emerging markets. Heidelberg is focusing its portfolio directly on
the key market trends in the printing industry. Although the total
volume of print products is remaining stable, there are differences
between developments in local markets and, increasingly, individual
market segments. FOCUS 2012 and the company's range of products
and services take this specifically into account.
"With our portfolio we are focusing on the growth areas of
the print media industry. As the global technology and market
leader, we will offer optimized business management processes and
solutions for innovative business models at this year's drupa,"
concluded Schreier.
Heidelberg will publish further details and an explanation of
the figures for the third quarter of financial year 2011/12 on
February 8, 2012.
For further information:
Heidelberger Druckmaschinen AG
Investor Relations
Robin Karpp
Tel: +49 (0)6221- 92 6020
Fax: +49 (0)6221- 92 5189
E-mail:
Robin.Karpp@Heidelberg.com
Heidelberger Druckmaschinen
A technology provider and partner in the print media
industry
Heidelberger Druckmaschinen AG (Heidelberg) is the world-wide
leading provider of solutions and services for the print media
industry. The name Heidelberg is internationally associated with
leading technology, top quality, and customer focus. The company's
core business covers with its equipment and services the entire
process and value chain of the sheetfed offset format classes from
20 inches (35 x 50 cm) to 64 inches (120 x 160 cm) as well as
digital printing solutions. Furthermore, contract manufacturing -
mainly for customers from other engineering sectors and the energy
sector - is gaining importance at Heidelberg.
Headquartered in the city of Heidelberg, Germany, with
production and development sites in seven countries and around 250
sales and service units in 170 countries, the company serves about
200,000 customers. Printing presses, prepress and postpress
equipment are mainly produced in Germany in compliance with severe
quality standards. For the Chinese market, standardized printing
machines for all common format classes as well as folding machines
are manufactured in Qingpu near Shanghai, China.
In financial year 2010/2011, the company had a sales volume
of 2.629 billion Euros. As of March 31, 2011, the Heidelberg Group
has employed a workforce of 15,282 including 631 trainees and
apprentices.
Important note:
This press release contains forward-looking statements
based on assumptions and estimations by the Management Board of
Heidelberger Druckmaschinen Aktiengesellschaft. Even though the
Management Board is of the opinion that those assumptions and
estimations are realistic, the actual future development and
results may deviate substantially from these forward-looking
statements due to various factors, such as changes in the
macro-economic situation, in the exchange rates, in the interest
rates and in the print media industry. Heidelberger Druckmaschinen
Aktiengesellschaft gives no warranty and does not assume liability
for any damages in case the future development and the projected
results do not correspond with the forward-looking statements
contained in this press release.