Varimatrix 105C Die-cutter - Look, No Stripper!
With all the benefits of its larger counterpart, the Varimatrix
105C is a cost-effective, small-footprint option for customers who
do not need a stripping unit on their die-cutter.
Many job types and finishing applications such as labels and embossing do not require waste to be stripped from the sheet. In these instances the Varimatrix 105C would be the ideal choice.
As well as being a more cost effective choice there are other benefits. With no stripping station the machine footprint is smaller, allowing installation in smaller areas where there is no room for a larger die-cutter.
For delicate die-cut jobs there is less disruption to the sheet as it now passes directly from die-cut station to the delivery, where fewer and smaller nicks are required. In addition, without stripping, make-ready and job changeover time is minimised.
When embossing or die-cutting a full sheet with multiple ups, heavy pressures will be required. The Varimatrix can apply up to 300 Tonnes of pressure. Under these conditions the rigid construction of the Varimatrix side frames and cutting area resists distortion, keeping make-ready (patch up) to a minimum.
The Varimatrix 105C brings with it all the advantages of its stripper-equipped stablemate. Able to handle a maximum sheet format of 750 x 1050mm and with the small sheet option, sheets as small as 310 x 400mm can be run. A wide range of substrates can be processed, paper, carton board and plastic sheets from 80gsm up to 1400gsm as well as B-flute corrugated.
With standard non-stop feeder and delivery, double sheet detector, pull and push guides on both sides of the machine and user guidance via touch screen the Varimatrix 105C is easy to operate and offers high productivity.
Further Information:
John Harrison
Product Manager - Packaging
Tel. +61 3 92054274
Email: John.Harrison@heidelberg.com
Many job types and finishing applications such as labels and embossing do not require waste to be stripped from the sheet. In these instances the Varimatrix 105C would be the ideal choice.
As well as being a more cost effective choice there are other benefits. With no stripping station the machine footprint is smaller, allowing installation in smaller areas where there is no room for a larger die-cutter.
For delicate die-cut jobs there is less disruption to the sheet as it now passes directly from die-cut station to the delivery, where fewer and smaller nicks are required. In addition, without stripping, make-ready and job changeover time is minimised.
When embossing or die-cutting a full sheet with multiple ups, heavy pressures will be required. The Varimatrix can apply up to 300 Tonnes of pressure. Under these conditions the rigid construction of the Varimatrix side frames and cutting area resists distortion, keeping make-ready (patch up) to a minimum.
The Varimatrix 105C brings with it all the advantages of its stripper-equipped stablemate. Able to handle a maximum sheet format of 750 x 1050mm and with the small sheet option, sheets as small as 310 x 400mm can be run. A wide range of substrates can be processed, paper, carton board and plastic sheets from 80gsm up to 1400gsm as well as B-flute corrugated.
With standard non-stop feeder and delivery, double sheet detector, pull and push guides on both sides of the machine and user guidance via touch screen the Varimatrix 105C is easy to operate and offers high productivity.
Further Information:
John Harrison
Product Manager - Packaging
Tel. +61 3 92054274
Email: John.Harrison@heidelberg.com
Varimatrix
The entry-level model for economical die-cutting and embossing. Impressive quality, flexibility, cost-effectiveness and a lot more. Product Information
